HSS-330 dynamic pressure Speed Sensor compatible to HoTT telemetry system
A speed indicator for all HoTT RC receiver with telemetry feedback to MC-xx, MX-xx radio controller or HF module with Smart Box. Measurement range up to 330 km/h. In connection with the voice output you have a high safety advantage. The pilot gets warned of an impending stall, caused of a low flight-speed.
Firmware Version 1.1
Use and Features:
- Easy initial operation (assemble pitostatic tube, plug in, switch on and read test result). No PC is necessary! Plug and Play!
- One-tube- system for easy installation
- Measurement range from 30 km/h to 330 km/h
- Adjustable speed warning „Stall Speed“ in the sensor or HoTT RC
- Dynamic pressure measurement ( comparison to real airplanes)
- 20Mhz RISC CPU (fast converting of test results)
- Automatic nullification (sensor calibration)
- Small, light, also fits into small models
- English manual
- Dynamic and static pressure interpretation for speed measurement
- Supports the HoTT Telemetry Bus since Version 4.0 with feedback of current speed and Top-speed (drag indicator)
HSS-330 Speed Sensor Specifications
Input voltage max.: 4,6-9Volt
Measurement range: 30-330Km/h
Error of measurement: +- 5Km/h
Measurement procedure: Back pressure, static and dynamic
Stall-Speed threshold memory: Yes available
Stall-Speed Setup: Manuel & via HoTT RC TX
Optical signalization: HoTT Bus Activity
Sensor Bus „Loop“: Yes
Size: B x L x T in mm 31 x 41 x 20
Weight: HSS Sensor without Pito and tube 18gr.
Scope of delivery: Pitostatic tube, silicon tube about 50 cm and Sensor Electronic