Futaba KFPC V1.0 - CB Elektronics

Go to content


Kolibri ECU Sbus2 Protocol Converter KFPC V1.0

A data protocol-converter for all Futaba Sbus2 receivers with telemetry feedback.
It is compatible for Kolibri turbines T15/T20/T25/T30 & T35 with Lambert Engine-Control-Unit (FADEC).


Firmware Version 1.0


Use and Features:   
Easy implementation, no PC is necessary! Plug and Play!
Compatible to Kolibri turbines T15/T20/T25/T30 & T35 with Engine-Control-Unit

The following 10 ECU measured values are transmitted to the receiver:
1. Turbine Status text message
2. EGT Exhaust temperature (°C)
3. Turbine RPM (Rotations/min.)
4. ECU Accumulator voltage (Volt)
5. Pump voltage
6. Kerosene/fuel flow rate (ml)
7. Fuel content, fuel amount (ml), adjustable tank size
8. Throttle lever specification in %
9. Thrust in Newton (N)
10. Special feature! Fast Flame out warning!

  • The most important GSU DATA are directly visible at the receiver
  • Future-proof!! Software Upgrade is possible supplementary (New Features)
  • 40Mhz RISC CPU (Fast processing of the measured values) NANO Watt Technology
  • Galvanic separation with optional KGS-1*
  • Small, light, also fits in small airplanes
  • English Manual
  • Made in Germany
  • Supports all Futaba Fasstest Sbus2 receivers
  • The Futaba Radio Control has to provide the so called “JetCat” Display (T18MZ and T18SZ TX)
  • All Futaba Sbus2 telemetry receivers with sensor data on Sbus2 are supported.


KFPC Specifications
Input voltage of the receiver: 5.0Volt to 8.4Volt
Measured Values / Status Values: Turbine Status, ECU-Voltage, EGT, RPM, Tank volume, Pump voltage, Rate of flow, Thrust and stick position
Alarm values  Adjustable within the Futaba RC
Storage of Setup  Yes permanently within EEPROM
Galvanic Separation ECU/ RC:  Yes*
Supported Kolibri Turbines:  T15, T20, T25, T30 and T35
Optical Signalization:   SBus2 Transmit
Futaba Sbus2:  Yes compatible
Measurements W x L x D in mm  46 x 60 x 10
Weight without cable  35gr.

*Galvanic seperation can be achieved with our optional KGS-1 unit

Scope of delivery: ECU Sbus2 Protocol Converter with Special Linkage cable to ECU/FADEC ( RJ-12/RJ-45); Complete Kit


Copyright CB-Elektronics 2022
Back to content