P2B JetCat V12 + IAS - CB Elektronics

Go to content

Turbine data protocol converter P2B-JetCat V12 + IAS Speed Sensor

The P2B-JetCat V12 + IAS data converter/sensor compatible with the CORE Telemetry from PowerBox Systems

Firmware Version 1.1

"Best in Class Turbine Dataconverter/Sensor"

Tailor made solution for all JetCat turbines with ECU V12. It comes with a IAS speed measurment kit in addition (+ IAS Kit Option). Extrem strong interface between all JetCat V12 ECU´s and the CORE telemetry bus. NEW unique displays!

Use and Features:

Easy implementing, no PC is necessary! Plug and Play!

Supporting all JetCat turbine using the new V12 ECU.

Future Turboprop engines with ECU V12 are supported with two additional displays. Second shaft RPM and Prop-RPM are available too.


The following ECU measured values are transmitted to the CORE radio control:

1. Turbine rotational speed (RPM)
2. Rotational speed of the second shaft (only available with JetCat SPT turbine types)
3. Prop RPM (only available with JetCat SPT turbine types)
4. EGT exhaust temperature (°C) and/or (°F). Dual display possible if needed or EGT in °F and all other values in metric.
5. Pump voltage with „Armed Alarm“ (fast Flame-Out Warning)
6. Thrust in Newton (N), matched to the type of turbine (see above)
7. Tank content fuel amount (mL) alarm can be set within the CORE RC TX
8. Kerosene / fuel flow rate (mL/min.)
9. Control stick gas default in %
10. ECU turbine accumulator operating voltage (ECU battery voltage)
11. ECU actual current in Amps
12. ECU battery consumed current in mAh
13. Turbine status text indication
14. Turbine "Off-Condition" shown in text
15. True IAS speed with our thousand times proven CB-IAS+ sensor technology

The most important EDT data are directly visible in your CORE radio control.

Imperial units like °F, lbf, fl.oz., oz/min. and mph are selectable.

The operator can further use the EDT GSU terminal and the I/O board. No terminal emulation occurs, therefore no reconnecting between data converter and EDT is necessary. The JetCat turbine I2C bus remains untouched. Together with the galvanic separtion this is the highest security level. Plug and Play with the CORE system.

IAS-SV (IAS short voice) feature!! Speeds up the CORE Accapella voice announcements for continues IAS speed values. There you get the best IAS speed trend speech in the market.

Support of up to 4 Turbines in one CORE telemetry installation (Turbine #1-4). Please ask for our multi-engine packages.

Future-proof!!! A supplementary software upgrade is possible (new features)
40Mhz RISC CPU (fast processing of the measure values) Nano Watt Technology
Full galvanic separation of radio control to ECU electric circuit
Small, light, also fits also in smaller models
Detailed english manual
Made in Germany

Scope of delivery: P2B-JetCat V12 Protocol Converter with special connection cable to the ECU. ECU I/O Splitter with cable for parallel operation of JetCat GSU (Ground Support Unit) and P2B-JetCat. CB IAS Plus sensor for true IAS speed display and indication (complete pitot tube and tubbing kit).

For quote please be so kind and use our contact form.

YouTube video:


Copyright CB-Elektronics 2022
Back to content