P2B XICOY + IAS - CB Elektronics

Go to content

Turbine data protocol converter P2B-Xicoy + IAS Speed Sensor including full galvanic separation of the turbine

The P2B-Xicoy + IAS data converter/sensor compatible with the CORE Telemetry from PowerBox Systems

Firmware Version 1.0

"Best in Class Turbine Dataconverter/Sensor"

Tailor made individual solution for all XICOY ECU (FADEC) compatible turbines. It comes with a IAS speed measurment kit in addition (+ IAS).

Use and Features:

Easy implementing, no PC is necessary! Plug and Play! Compatible with XICOY V10 brush- and brushless ECU (FADEC) and the fast CORE telemetry bus.

Each of the following turbines are supported with a individual template. Selectable inside the CORE TX setup menu:

30gen, X-45, 60gen, M-70XBL, VT-80, VT-90BLR & 90G, M-100XBL & ATJ100SV, 120gen, Merlin-140 & ATJ140SV, Merlin-160G 166TS & ATJ160SV, Hybl  H16 & ATJ190SV, 200XBL M210TS & ATJ220SV, 260gen & ATJ250SV, 320gen


This makes the installation very easy, just select your turbine, all parameter are perfectly set then. No complecated adjustment of a fuel factor.

The following ECU measured values are transmitted to the CORE radio control:

1. Turbine rotational speed (RPM)
2. EGT exhaust temperature (°C or F°)
3. Pump Pulse value with „Armed Alarm“ (fast Flame-Out Warning)
4. Thrust in Newton (N or lbf), matched to the type of turbine (see above)
5. Tank content fuel amount (mL or lq oz) alarm can be set within the CORE RC TX
6. Kerosene / fuel flow rate (mL/min. or oz/min.)
7. Control stick gas default in %
8. ECU turbine accumulator operating voltage (ECU battery voltage)
9. Turbine status text indication
10. Turbine type and stick situation shown in text
11. True IAS speed with our thousend times proven CB-IAS+ sensor technology

The most important EDT data are directly visible in your CORE radio control.

Taxi tank function at your finger tip control!

Imperial units like °F, lbf, fl.oz., oz/min. and mph are selectable via the CORE TX

The operator can further use the EDT GSU terminal side by side together with our converter.  Plug and Play with the CORE system

Support of up to 4 Turbines in one CORE telemetry installation (Turbine #1-4). Please ask for our multi-engine packages.

Full galvanic separation of the XICOY ECU (FADEC). These galvanic separation includes the throttle-, telemetry channel and the power supply for the ECU.
This give you a maximum protection for your CORE receiver system. Full galvanic separation means No ESD (Electro static discharge) can damage your CORE receiver system.

This exclusive security feature is actually only available for CORE customer

Please see our technical white paper for further information on galvanic separation.

Future-proof!!! A supplementary software upgrade is possible (new features)
40Mhz RISC CPU (fast processing of the measure values) Nano Watt Technology
Small, light, also fits also in smaller models
Detailed english manual
Made in Germany

Scope of delivery: P2B-XICOY converter with all connection cables for the ECU, GSU and the CORE receiver. CB IAS Plus sensor for true IAS speed display and indication (complete pitot tube and tubbing kit) included.

For quote please be so kind and use our contact form.

Copyright CB-Elektronics 2022
Back to content