P2B Kolibri + IAS - CB Elektronics

Go to content
Turbine data protocol converter P2B Kolibri + IAS Speed Sensor

The P2B Kolibri + IAS data converter/sensor is compatible with the CORE Telemetry from PowerBox Systems

Tailor made support for all Lambert turbines from T15 up to T50

Firmware Version 1.0

"Best in Class Turbine Dataconverter/Sensor"


Use and Features:

Easy implementing, no PC is necessary! Plug and Play! Compatible with Lambert ECU and the fast CORE telemetry bus


„Customized” tailor made individual support (thrust indication and flow rate/min.) for the following turbines

Kolibri T15, T20, T25, T30, T35, T40, T45 und T50

The following ECU measured values are transmitted to the CORE radio control:

1. Turbine rotational speed (RPM)
2. EGT exhaust temperature (°C)
3. Pump voltage with „Armed Alarm“ (fast Flame-Out Warning)
4. Thrust in Newton (N), matched to the type of turbine (see above)
5. Tank content fuel amount (mL) alarm can be set within the CORE RC TX
6. Kerosene / fuel flow rate (mL/min.), matched to the type of turbine (see above)
7. Control stick gas default in %
8. ECU turbine accumulator operating voltage (ECU battery voltage)
9. Turbine status text indication
10. True IAS speed with our thousend times proven CB-IAS+ sensor technology

The most important EDT data are directly visible in your CORE radio control.
Plug and Play with the CORE system

Support of up to 4 Turbines in one CORE telemetry installation (Turbine #1-4)

Future-proof!!! A supplementary software upgrade is possible (new features)
40Mhz RISC CPU (fast processing of the measure values) Nano Watt Technology
Full galvanic separation of radio control to ECU electric circuit
Small, light, also fits also in smaller models
Detailed english manual
Made in Germany

P2B Kolibri Specifications
Input voltage of the receiver: 5.0Volt to 8.4Volt
Measured Values / Status Values: Turbine Status, ECU-Voltage, EGT, RPM, Tank volume, Pump voltage, Rate of flow, Thrust, stick position and IAS
Alarm values  Adjustable within the CORE radio
Storage of Setup  Yes permanently within EEPROM
Galvanic Separation ECU/ RC:  Yes*
Supported Kolibri Turbines:  T15, T20, T25, T30, T35, T45 and T50
Optical Signalization:   CORE bus Transmit
CORE telemetry:  Yes compatible
Measurements W x L x D in mm  46 x 60 x 10
Weight without cable  35gr.

*Galvanic seperation can be achieved with our optional KGS-1 unit


Scope of delivery: P2B Protocol Converter with special connection cable to the ECU. CB IAS Plus sensor for true IAS speed display and indication (complete pitot tube and tubbing kit).

For quote please be so kind and use our contact form.





Copyright CB-Elektronics 2022
Back to content